The AT-LPW50BT-RW is belt-drive turntable with a high-performance cartridge and wireless connectivity.
The AT-LPW50BT-RW features an anti-resonance 30 mm thick medium density fiberboard plinth with a stunning rosewood-finished wood veneer. This is used to dampen low-frequency acoustical feedback. It also comes equipped with a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and a matching matte-silver AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus. It is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50BT-RW is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct wired connection to components with or without a dedicated phono input. The turntable also connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology.
Specifications
Bluetooth version 5.2 RF
15 mW
Line of sight - approx. 10 m (33')
2.402 GHz to 2.480 GHz
GFSK, Pi/4DQPSK, 8DPSK
A2DP
SBC
Belt-drive manual turntable
DC servo with Active Speed Stabilization
Belt Drive
33-1/3 RPM, 45 RPM
Aluminum Die Casting
< 0.15 % WRMS (33 RPM) at 3 kHz
> 60 dB
PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec- LINE: 200 mV nominal at 1 kHz, 5 cm/sec
35 dB nominal, RIAA equalized
Static balanced straight carbon tonearm
223.6 mm
18.6 mm
Less than 2.0°
Stylus Pressure Adjustment Range:
0 to 3.0 g
Applicable Cartridge Weight Range (including headshell):
11.5 to 16.5 g
Cartridge Model:
AT-VM95EBK
Cartridge Type:
VM
Recommended Load Impedance:
47,000 ohms
Output Voltage:
4.0 mV (mV at 1 kHz, cm/sec)
Stylus:
0.3 × 0.7 mil bonded elliptical stylus
Cantilever:
Aluminum pipe
Tracking Force Range:
1.8 to 2.2 g (standard 2.0 g)
Cartridge Weight:
6.1 g (0.22 oz)
Headshell Model:
AT-HS4 SV
Headshell Weight:
8.5 g (including lead wires)
7.7 g (excluding lead wires)
Headshell Overhand Adjustment:
±5 mm
Power Supple Requirements:
100-240 V, 50Hz/60Hz, 0.6A Max.
Power Consumption:
1.8 W
AC Adapter:
12 V, 1.0 A
Dimensions:
16.54" × 13.39" × 4.96" (W × D × H)
Weight:
12 lbs
Accessories Included:
Dust cover, Rubber mat, Platter (with drive belt), Dust cover hinges, Counterweight, Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK), 45-RPM adapter, RCA audio cable (Approx. 1.0 m (3.3')), AC adapter (Approx. 1.5 m (4.9'))
Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- High-fidelity audio with Bluetooth wireless technology
- Motor features a speed-sensor system to maintain accurate platter rotation speed
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 (silver) universal ½“-mount headshell and AT-VM95E (black)
- Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
- The AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover