Half-inch mount turntable cartridge.
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws—no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features
- Frequency Response 20-20,000 Hz
- Channel Separation 18 (dB at 1 kHz)
- Vertical Tracking Angle 23°
- Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
- Stylus Construction Bonded round shank
- Recommended Load Impedance 47,000 ohms
- Coil Impedance 3.3 k ohms (1 kHz)
- DC Resistance 485 ohms
- Coil Inductance 550 mH (1 kHz)
- Load Capacitance 100 to 200 pF
- Output 4.0 mV (1 kHz, 5 cm/sec.)
- Channel Balance 2.5 dB (1 kHz)
- Stylus Shape 0.6 mil conical
- Cantilever Aluminum pipe
- Mount Half-inch
- Weight 6.1 g (0.22 oz)
- Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
- Replacement Stylus AT-VMN95C
- Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers