A versatile pro modular mini mic and boom stand system.
The Audix MB5050-HC package includes the Audix MICROBOOM-50 Boom System fitted with an Audix M1250B-HC Hypercardioid Mic capsule.
MICROBOOM-50 Boom System
The MICROBOOM-50 is a simple-to-use modular system that can be used with a choice of capsules in the Audix Micros series, offering a broad choice of pick-up pattern and frequency response. The MicroBoom-50 System is a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra. It is 50 inches long and is made from a strong, lightweight carbon fiber. High quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector.
The stand adapter designed for the MicroBoom allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The angle and position of the microphone is controlled using the flexible metal gooseneck below the microphone. The MicroBoom-50 provides an ultra-clean, professional, and elegant appearance on stage while providing exceptional performance and portability.
M1250B-HC Hypercardioid Mic
The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B-HC, which is equipped with a hypercardioid capsule that can be used in a wide variety of live, studio and broadcast applications. The M1250B-HC is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
MICROBOOM-50 Boom System
The MICROBOOM-50 is a simple-to-use modular system that can be used with a choice of capsules in the Audix Micros series, offering a broad choice of pick-up pattern and frequency response. The MicroBoom-50 System is a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra. It is 50 inches long and is made from a strong, lightweight carbon fiber. High quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector.
The stand adapter designed for the MicroBoom allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The angle and position of the microphone is controlled using the flexible metal gooseneck below the microphone. The MicroBoom-50 provides an ultra-clean, professional, and elegant appearance on stage while providing exceptional performance and portability.
M1250B-HC Hypercardioid Mic
The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B-HC, which is equipped with a hypercardioid capsule that can be used in a wide variety of live, studio and broadcast applications. The M1250B-HC is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Specifications
MICROBOOM-50 Boom Mic System:
- Material: rod carbon fiber
- Gooseneck: steel
- Connectors: brass
- Length: 50" / 1,270mm
- Diameter: .20" / 5.08mm
- Connectors: bottom: mini-XLR male; top: mini-XLR female
- Weight: 4 ounces / 111 grams (without mic or clip)
- Finish: non-reflective black
- Transducer type: condenser
- Frequency response: 50 Hz - 19 kHz
- Polar pattern: hypercardioid
- Output impedance: 150 ohms
- Sensitivity: 10 mV / Pa @ 1k
- Signal/noise ratio (A-weighted): 73 dB
- Equivalent noise level (A-weighted): 21 dB
- Maximum SPL @ .5% THD: ‰140 dB
- Dynamic Range: 119 dB
- Power Requirements: 18 - 52 V
- Connector: 3 pin mini-XLR(male)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing: Machined brass
- Finish: Powder coat
- Length: 50" / 1270mm
- Diameter: .20" / 7.4mm
- Weight 0.55 oz / 15.6 grams
- Length 2.1 inches / 54 mm
Features
MICROBOOM-50 Boom Mic System:
- Lightweight, rigid
- Portable, easy to position
- Clean, elegant appearance
- Choice of capsules
- Exceptional sound quality
- No external power adapter needed
- Attaches to any mic stand
- Can be used horizontally or vertically
- Applications:
- Choir
- Ensemble vocal
- Theatre
- Orchestral zone miking
- Location recording
- Presentation
- Conference room
- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Applications:
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech / Presentation
- Cymbals / Percussion
- 25' shielded mic cable. Mini-XLR(female) - XLR(male) (CBL-M25)
- Mic stand adapter with thumbscrew and wing nut adjustments (MC-MICRO)
- Hanging clip: (MC-HANGER)
- Windscreen (WS1218)