Wireless Freedom for Pedalboards
With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.
Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.
System includes receiver and transmitter.
Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.
System includes receiver and transmitter.
Specifications
Specifications-Receiver
able Tone switch (OFF/SHORT/LONG)
ower
Receive
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack
Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)
During wireless operation: 60 mA
While charging transmitter: 320 mA
Alkaline battery (AA, LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use
Width
121 mm
4-13/16 inches
Height
220 g
8 oz
S
Indicator
battery
Input plug: 1/4-inch TRS phone type,
DC IN 5 V port: USB Micro-B type
Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port
350mA
Approximately 3 hours
Approximately 12 hours
* These figures will vary depending on the actual conditions of use.
Width
able Tone switch (OFF/SHORT/LONG)
ower
Receive
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack
Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)
During wireless operation: 60 mA
While charging transmitter: 320 mA
Alkaline battery (AA, LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use
Width
72 mm- 2-7/8 inches
121 mm
4-13/16 inches
Height
56 mm- 2-1/4 inches
220 g
8 oz
S
- Nominal Input Level
Indicator
battery
Input plug: 1/4-inch TRS phone type,
DC IN 5 V port: USB Micro-B type
Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port
350mA
Approximately 3 hours
Approximately 12 hours
* These figures will vary depending on the actual conditions of use.
Width
- 87 mm
- 3-7/16 inches
22 mm- 7/8 inches
- Height
- 36 mm
- 1-7/16 inches
- Weight
Features
- Owner's Manual
- Leaflet USING THE UNIT SAFELY
- Transmitter
- Rubber foot x 4
- Alkaline battery (AA, LR6) x 2
- An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).
- AC adaptor: PSA-S series
- Parallel DC cord: PCS-20A (DC Plug x8)