A simple stripped-down version of the Pro Series Plexitone.
The single-channel Carl Martin PlexiTone was designed in association with Pete Thorn, and is housed in a small pedalboard-friendly housing with three knobs and one switch. Apart from Thorn's slight modifications that give this new pedal a tighter bottom end and slightly softer high frequencies, it is exactly the same gain structure as the High Gain setting on the original Pro-Series PlexiTone. It just plays better with different amps.
The single Plexi also incorporates the new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V power supply, but will still operate on the same +-12V level as the original AC powered PlexiTone. This allows Carl Martin to use the same high-quality components, which provide the same tone and headroom that make the CM Pro-Series stand out from the rest.
The single Plexi also incorporates the new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V power supply, but will still operate on the same +-12V level as the original AC powered PlexiTone. This allows Carl Martin to use the same high-quality components, which provide the same tone and headroom that make the CM Pro-Series stand out from the rest.
Specifications
- Battery: The PlexiTone does not accept the use of battery, only external power supply
- Power consumption: max. 62 mA
- Power supply: 9V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-)
- Input: 1 mohm
- Output: 200 ohm
- S/N Ratio: 54dB
- Dimensions WxDxH: 4.72" x 3.74" x 2.2"
- Weight: 0.94 lb.
Features
- Designed in association with Pete Thorn
- Pedalboard friendly
- Tighter bottom-end and slightly softer high frequencies