The single-channel Transaudio Daking Microphone Preamp/EQ is a high-end, all-discrete Class-A transformer balanced (input and output) unit that combines a mic pre and 4-band EQ in one single rack unit. Separate mic and line inputs can be selected from the front panel “line” switch without changing wires in back. Both inputs are combo XLR/ 1/4" TRS. A high gain of 70dB handles all types of mics from ribbons to dynamics and condensers. Switched phantom enables secure ribbon mic use; a 20dB pad switch prevents overload on high output condensers mics.
The front panel features a phase switch for inverting the input phase, plus large overall mute and bypass buttons for speedy work flow. The Mic Pre/EQ has 4 individual EQ bands and 5 stepped frequencies per band—specially chosen for effective results in tracking, mixing and mastering. A continuously-variable EQ boost or cut of 15dB 25Hz High Pass 6 db/octave filter gets rid of low-end rumble. The 12dB per octave Low Pass filter at 15kHz takes off extreme top end edginess. A separate overall output level control makes up gain lost in extensive EQ cuts.
All relay switching is made with gold bi-furcated contacts for long term life. To keep the noise floor low, it “remotes” the power with an outboard in-line universal power supply. The Transaudio Daking Mic Pre/EQ is built to last in steel.
The front panel features a phase switch for inverting the input phase, plus large overall mute and bypass buttons for speedy work flow. The Mic Pre/EQ has 4 individual EQ bands and 5 stepped frequencies per band—specially chosen for effective results in tracking, mixing and mastering. A continuously-variable EQ boost or cut of 15dB 25Hz High Pass 6 db/octave filter gets rid of low-end rumble. The 12dB per octave Low Pass filter at 15kHz takes off extreme top end edginess. A separate overall output level control makes up gain lost in extensive EQ cuts.
All relay switching is made with gold bi-furcated contacts for long term life. To keep the noise floor low, it “remotes” the power with an outboard in-line universal power supply. The Transaudio Daking Mic Pre/EQ is built to last in steel.
Features
- • Single-channel Class-A microphone preamp with EQ
- • Transformer Balanced Inputs and Output
- • All Discrete transistor circuitry
- • Class “A” amplifiers
- • Four Band EQ with hard bypass
- • Continuously variable boost and cut: +-16dB
- • Stepped frequencies:
- High Shelving 8-10-12-15k-20k
- Upper Mids 1.5-3-5-7-9K
- Lower Mids 125hZ-250hZ-500hZ-1K-2K
- Low Shelving 30-50-80-100-150hZ
- High & Low Pass Filters 25hZ & 15KhZ
- • All relay switching with gold bi-furcated contacts
- • Switched +48v Phantom power
- • Remote controllable mute and bypass
- • 20dB pad on mic input
- • Stainless steel construction for noise immunity
- • Aluminum knobs
- • Output level control before last stage of gain