Item #1148257 Model #ST2011C

DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids Standard

$2,050.00

Availability
Delivery
Out of stock
Pickup In-Store
Choose Store

This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Email me when in stock

Save to Wishlist

Compact stereo cardioids.

The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair of handpicked cardioid microphones are selected on sensitivity within ±1.5 dB, which makes stereo principles such as XY and ORTF easy to orchestrate. The compact design and controlled directionality of the 2011C make this perfect pair an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty Peli transportation box allows for fast and easy exchange of microphone/accessory inlays. Peli Case for quality transportation and protection.
Specifications
  • Directional pattern: Cardioid
  • Principle of operation: Pressure gradient, with interference tube
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 Pa (max. 23 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 146 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 64 g (2.3 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 92 mm (3.6 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40 C to 45 C (-40 F to 113 F)
  • Relative Humidity (RH): Up to 90%
  • Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

Features

Audio
  • Frequency response: 20Hz to 20kHz
  • Max SPL: 146 dB
Pattern and type
  • Capsule: Condenser
  • Pattern: Cardioid
  • Type: Mounted
  • Applications: Studio, stage, theatrical
  • Phantom power required: Yes
Size and weight
  • Length: 3.6
  • Weight: 2.3 oz.
Included accessories
  • Case: Hard case
  • Clip: Hard rubber
  • Power supply: No