High-quality microphone pair, low profile design.
The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don't have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.
Specifications
- Frequency Response: 30Hz to 30kHz ±2dB at 6 inches (15cm)
- Polar Pattern: Cardioid or Hypercardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 100Î, balanced (50Î ea. pin 2 & 3)
- Min Output Load: 600Î between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Positioning Range: From 10 inches to 4.7 feet above floor level
- Dimensions: Stand 4'7³ (1.39m); Base 12³ (30.5cm) in diameter, 1.1³ (2.7cm) high
- Weight: Stand 2 lbs (.9kg); Cast iron base 12.6 lbs (5.7kg)
Features
- Uniform frequency response on or off axis
- Frequency response of 30Hz to 30kHz
- Near perfect polar response
- Perfect solution for choirs and vocal groups
- Large flex section and mini-gooseneck
- Substantial improvement in gain before feedback
- Ideal where bands or orchestras are placed in front of a choir
- Sturdy cast-iron base
- Up to 4.7' high