Can be implemented directly on a Dante network.
Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz. The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.
Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. Both RedNet Control and Dante Controller software are included.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the new bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
Specifications
- 0 dBFS Reference Levels: 22dBu
- Frequency Response: 20Hz–20kHz ±0.1dB
- THD+N: -105dB (0.0006%) unweighted, 20Hz–20kHz; -1dBFS input
- Noise in Presence of Signal: -121dBu 'A'-Weighted (typical)
- Dynamic Range: 121dB 'A'-weighted (typical), 20Hz–20kH
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24-bit
- Clock Sources: Internal or Word Clock
- Input to Input: < -100dB; 20Hz–20kHz (driven channel at -20dBFS)
- Channel Count: 2 x Dante channels
- Output: 2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above)
- Channel Count: 2 x AES3 channes
- Output: 1 x Male XLR
- Channel Count: 2 x ADAT channels
- Output: 1 x TOSLINK connectors
- Channel Assignments @ 44.1kHz, 48 kHz: Port 1 = Channels 1 -2
- Channel Assignments @ 88.2kHz, 96 kHz: SMUXI: Port 1 = Channels 1 -2
- Channel Assignments @ 176.4kHz, 192 kHz: SMUXII: Port 1 = Channels 1 -2
- Channel Count: 2 x S/PDIF channels
- Output:1 x RCA phono socket
- Word Clock Input: 1 x BNC 75 Ohm port (Switchable Termination)
- Word Clock Output: 1 x BNC 75 Ohm port
Features
- RedNet Control
- Dante Controller
- SA ADN2 Two-channel A-D Card
- Safety Information cut sheet
- Focusrite Pro Important Information Guide provides links to: RedNet Control 2, Audinate Dante Controller (installed with RedNet Control 2)
- Prop 65 warning needed for California residents:
- WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go towww.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov