Mogami Gold multicore cables are designed for the highest level of audio performance and feature superb electrical and mechanical characteristics while remaining compact, superflexible and easy to use.
Specifications
- Conductor: 30/0.08A (0.15mm sqœ) #26AWG (30…#40AWG)
- Insulation: 1.0 XLPE (Cross Linked Polyethylene) (0.039")
- Drain Wire: 7/0.18TA (0.18mm sqœ) #25AWG (7…#33AWG)
- Served Shield: Approx. 58/0.10A Served (spiral) Shield
- Jacket (Covering): 2.8 Flexible PVC (0.110")
- Identification: See core number identification table
- DC Resistance at 20 deg C: Inner Pair Conductor: 0.13W/m(0.040W/Ft); Shield: 0.031W/m(0.0095W/Ft)
- Capacitance at 1kHz, 20 deg C (Partial Capacitance Value) See Figure (1): K0: 130pF/m(40pF/Ft); K1: 12pF/m(3.7pF/Ft)
- Inductance: 0.6H/m(0.18H/Ft)
- Electrostatic Noise (Hum Pick-up)*: 2.5mV Max.
- Electromagnetic Noise at 10kHz*: (Inductance of the toroidal core: 595H): 0.1mV Max.
- Microphonics*: Method: Stepping on cable: 50mV Max. at 50kW Load
- Voltage Breakdown: Must withstand at DC 500V/15sec.
- Insulation Resistance at DC 125V, 20 deg C: 100000 MW … m Minimum
- Tensile Strength of one pair (26 deg C, 65% RH): 274N
- Emigration: Non-emigrant to ABS resin
- Applicable Temperature: -20 deg C +70 deg C(-4 deg F +158 deg F)
- Standard: UL13 CL2X 60 deg C / UL 20002 AWM 30V 60 deg C VW-1
- Conductor: 7/0.18A (0.178mmœ) #25AWG (7…#33AWG)
- Insulation: 1.05 XLPE (Cross Linked Polyethylene) (0.0413")
- Drain Wire: 7/0.18A (Exactly same as conductor)
- Shield: Approx. 58/0.10A Served (spiral) Shield
- Jacket (Covering): 2.8 Flexible PVC (0.110")
- Identification: See core number identification table
- DC Resistance at 20 deg C: Inner Pair Conductor: 0.11W/m(0.0336W/Ft)
- Shield: 0.031W/m(0.0095W/Ft)
- Capacitance at 1kHz, 20 deg C (Partial Capacitance Value) See Figure (2): K0: 140pF/m(42.7pF/Ft)
- K1: 12pF/m(3.7pF/Ft)
- Inductance: 0.6H/m(0.18H/Ft)
- Electrostatic Noise (Hum Pick-up)*: 2.5mV Max.
- Electromagnetic Noise at 10kHz*
- (Inductance of the toroidal core: 595H): 0.1mV Max.
- Microphonics* Method: Stepping on cable: 50mV Max. at 50kW Load
- Voltage Breakdown: Must withstand at DC 500V/15sec.
- Insulation Resistance at DC 125V, 20 deg C: 100000 MW … m Minimum
- Tensile Strength of one pair (26 deg C, 65% RH): 274N
- Emigration: Non-emigrant to ABS resin
- Applicable Temperature: -20 deg C +70 deg C(-4 deg F +158 deg F)
- Standard: UL13 CL2 60 deg C
Features
- Individually twisted shielded pairs.
- XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics and will not melt or shrink back during soldering.
- Rugged and flexible construction that is easy to handle, even at temperatures down to -20 deg C (-4 deg F).
- Easy audio cable identification system:
- Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped.
- Outer jackets of each pair are color coded by standard resistor color code, allowing quick identification of conductor pairs.
- Inner conductors are also color coded based on the international standard resistor color code. Each pair is color coded by jacket and conductor color combination.
- Each channel has a drain wire and served (spiral) bare copper shield. The drain wires simplify termination and can be crimped by the same size contact as the inner conductor pair.
- CL2 rated version available. Conductor size of CL2 rated version is thicker #25AWG so that it is also recommended for rugged application and firm and easier crimp terminal connector wiring as well as NEC fire regulation requirement.
WARNING: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.