High-definition coaxial monitors for detailed audio.
The PreSonus Eris Pro 6 (2nd Gen) reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging and symmetrical dispersion patterns—unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
The Eris Pro 6 (2nd Gen) also delivers finely detailed transient response and stunning dynamics that delivers a natural and less fatiguing experience. A 1.25" ultralow mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5" woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 6 to reach down to an astonishing 35Hz. Acoustic tuning controls let you configure the Eris Pro 6 (2nd Gen) for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner. Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
The Eris Pro 6’s coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings. Combined with a punchy low end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.
The Eris Pro 6 (2nd Gen) also delivers finely detailed transient response and stunning dynamics that delivers a natural and less fatiguing experience. A 1.25" ultralow mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5" woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 6 to reach down to an astonishing 35Hz. Acoustic tuning controls let you configure the Eris Pro 6 (2nd Gen) for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner. Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
The Eris Pro 6’s coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings. Combined with a punchy low end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.
Specifications
- Frequency Response: 35Hz to 20kHz
- Peak SPL: 103dB (@ 1M)
- LF Amplifier Power: 75W, Class-AB
- HF Amplifier Power: 65W, Class-AB
- LF Driver: 6.5" woven composite
- HF Driver: 1.25", silk-dome
- Inputs (1 each): Balanced XLR, balanced 1/4" TRS, unbalanced RCA
- Controls: Volume, High Frequency, Low Frequency, Acoustic Space, Low Cut, Power Saver
- Dims (HxWxD): 11.42" x 9.45" x 11.18"
- Weight: 16.98 lb.
Features
- Single point-source coaxial design for a wider sweet spot and better phase alignment
- 6.5" woven-composite, low-frequency driver
- 1.25" silk-dome, high-frequency driver
- 140W, Class AB amplification
- 35Hz to 20kHz frequency response
- 106dB SPL (Peak, @ 1 meter)
- Acoustic Tuning Controls: Acoustic Space (Flat, -2dB, -4dB), High Frequency (±6dB, center 10kHz, continuously variable), Mid Frequency (±6dB, center 1kHz, continuously variable), Low Cut (Flat, 80Hz, 100Hz @ -12 dB / octave)
- XLR and 1/4" TRS balanced and RCA unbalanced rear-panel stereo inputs
- Protection: RF interference, output-current limiting, over-temperature, turn on/off transient, subsonic filter
- Power Saver mode (engages after 40 minutes)
- Wall and ceiling mountable