The ultimate signal routing hub.
The Radial LX-3 is a balanced line-level splitter that sends one audio signal to as many as three destinations at once. Completely passive with no need for power, the LX-3 sends your audio where it needs to go.
The LX-3 features a premium Jensen® JT-123-FLPCH transformer, which boasts a broad frequency frequency response, high signal level handling and low distortion, all of which combine to provide the highest possible signal quality. It features two isolated outputs to eliminate hum and buzz from ground loops, along with a third direct output. All three XLR outputs have ground lift switches for additional noise suppression, and a switchable -12dB input pad allows you to connect even the hottest line outputs without fear of overloading or distortion. The input of the LX-3 is accessed with an XLR/TRS combo jack that allows you to connect via balanced or unbalanced cables; the LX-3 will automatically balance the signal at the isolated outputs, preventing interference and signal degradation over long cable runs.
The LX-3 is built rugged to handle the road, with heavy-duty 14-gauge steel construction. A bookend design creates a protective housing around the connectors and switches to prevent damage even in a harsh concert touring environment, and an internal I-beam frame makes it almost impossible to torque the circuit board and damage connections. Typical applications include splitting a signal in the studio to send to multiple effects, feeding a console output to a number of recording devices, or even splitting a signal on a live stage to multiple monitors or headphone mixers.
The Radial LX-3 delivers pristine audio and ultra-quiet performance that allows you to confidently and professionally split your signal to any destination.
The LX-3 features a premium Jensen® JT-123-FLPCH transformer, which boasts a broad frequency frequency response, high signal level handling and low distortion, all of which combine to provide the highest possible signal quality. It features two isolated outputs to eliminate hum and buzz from ground loops, along with a third direct output. All three XLR outputs have ground lift switches for additional noise suppression, and a switchable -12dB input pad allows you to connect even the hottest line outputs without fear of overloading or distortion. The input of the LX-3 is accessed with an XLR/TRS combo jack that allows you to connect via balanced or unbalanced cables; the LX-3 will automatically balance the signal at the isolated outputs, preventing interference and signal degradation over long cable runs.
The LX-3 is built rugged to handle the road, with heavy-duty 14-gauge steel construction. A bookend design creates a protective housing around the connectors and switches to prevent damage even in a harsh concert touring environment, and an internal I-beam frame makes it almost impossible to torque the circuit board and damage connections. Typical applications include splitting a signal in the studio to send to multiple effects, feeding a console output to a number of recording devices, or even splitting a signal on a live stage to multiple monitors or headphone mixers.
The Radial LX-3 delivers pristine audio and ultra-quiet performance that allows you to confidently and professionally split your signal to any destination.
Features
- Send one audio signal to three destinations simultaneously
- Jensen® transformer equipped for exceptional audio quality
- Eliminates hum and buzz caused by ground loops
- 14-gauge steel construction and military-grade circuit board for incredible durability
WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.