Item #1009816 Model #MX202BP/C

Shure MX202P MicroFlex Overhead Condenser Mic with Plate-Mount Preamp Black Cardioid

$233.00

Availability
Delivery
In Stock
Pickup In-Store
Save to Wishlist

Accurate sound reproduction in an unobtrusive overhead microphone.

The MX202P Microflex Overhead condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202P features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The plate-mounted preamp offers easy ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum.

Also available with an inline preamp (see product # 270395).
Requires phantom power.
Specifications
  • Frequency Response
  • 50 to 17,000 Hz
  • Output Impedance
  • 180 ohms actual (EIA rated at 150 ohms)
  • Sensitivity (At 1,000 Hz, open circuit voltage*)
  • Cardioid: -35.0 dBV/Pa (17.8 mV)
  • Supercardioid: -33.5 dBV/Pa (21.1 mV)
  • All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
  • Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
  • Cardioid: 124.2 dB
  • Supercardioid: 122.7 dB
  • All values +6 dB at 0 gain
  • Equivalent Output Noise (A-weighted)
  • Cardioid: 28.0 dB SPL
  • Supercardioid: 26.5 dB SPL
  • Signal to Noise Ratio (referenced at 94 dB SPL)
  • Cardioid: 66.0 dB
  • Supercardioid: 67.5 dB
  • Dynamic Range at 1 k ohm load
  • 96.2 dB
  • 100 dB at 0 gain
  • Common Mode Rejection
  • 45.0 dB minimum
  • Preamplifier Output Clipping Level (1% THD)
  • -6.0 dBV (0.5 V)
  • -12 dBV at 0 gain
  • Polarity
  • Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  • Power Requirements
  • 11 to 52 Vdc phantom, 2.0 mA
  • Environmental Requirements
  • Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
  • Relative Humidity
  • 0 to 95%
  • Cable Length
  • 9 m (30 ft)

Features

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs