Includes transmitter receiver and mic.
This SLXD14/DL4 wireless system package includes Shure's SLXD1 digital wireless bodypack, an SLD4 reciever and DL4B lavalier microphone and comes in a choice of three bandwidths (G58: 470–514mHz, H55: 514–558mHz, J52: 558–616mHz).
SLXD1 Digital Wireless Bodypack Transmitter
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock-solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD1 easily syncs with a wireless receiver. TQG connectivity to a variety of microphone options guarantees the right solution for a wide range of applications, from daylong conference to nighttime performances.
SLXD4D Dual-Channel Digital Wireless Receiver
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD4D easily syncs wireless transmitters. A variety of interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from day-long conference to nighttime performances.
Shure DL4B Lavalier Microphone
The Shure DuraPlex DL4 is a professional MEMS condenser lavalier microphone that is ideal for both speech and performance applications in challenging environments. The IP57 rated omnidirectional lavalier is dust resistant and waterproof, manufactured for use in applications that require extended durability, uncompromised sound quality and reliability. The subminiature design and various mounting options provide discrete placement in applications for film, television, education and corporate events.
SLXD1 Digital Wireless Bodypack Transmitter
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock-solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD1 easily syncs with a wireless receiver. TQG connectivity to a variety of microphone options guarantees the right solution for a wide range of applications, from daylong conference to nighttime performances.
SLXD4D Dual-Channel Digital Wireless Receiver
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD4D easily syncs wireless transmitters. A variety of interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from day-long conference to nighttime performances.
Shure DL4B Lavalier Microphone
The Shure DuraPlex DL4 is a professional MEMS condenser lavalier microphone that is ideal for both speech and performance applications in challenging environments. The IP57 rated omnidirectional lavalier is dust resistant and waterproof, manufactured for use in applications that require extended durability, uncompromised sound quality and reliability. The subminiature design and various mounting options provide discrete placement in applications for film, television, education and corporate events.
Specifications
SLXD1 Digital Wireless Bodypack Transmitter
- Battery Type: Rechargeable Li-Ion or 1.5V AA batteries
- Dimensions (HxWxD): 3.86" x 2.68" x 1"
- Weight: 3.1 oz.
- Housing: PC/ABS
- Audio Input
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 mohm
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Or Equivalent Input Noise (EIN): 118 dBV
- FF Output
- Antenna Type: 1/4 Wave
- Occupied Bandwidth: <200kHz
- Modulation Type: Shure Proprietary Digital
- Power: 1 mW/10 mW – varies by region
- Microphone
- DL4B: DuraPlex Omnidirectional Waterproof Lavalier Microphone
- Dimensions (HxWxD): 1.65" 15.5" x 5.98"
- Weight : 3.2 lb. (without antennas)
- Housing: Galvanized Steel
- Power Requirements: 15 VDC @ 600 mA
- Supplied by external power supply (tip positive)
- FF Input
- Spurious Rejection: >75 dB Typical
- Connector Type: BNC
- Impedance: 50 ohm
- Audio Output
- Gain Adjustment Range: 18 to +42dB in 1dB steps
- Configuration: 1/4" (6.35 mm): Balanced
- (Tip =audio +, Ring=audio –, Sleeve=ground)
- XLR: Balanced (1=ground, 2 =audio +, 3=audio –)
- Impedance: 1/4" (6.35 mm): 1.3 kohm (670 ohm Unbalanced)
- XLR (line): 400 ohm (200 ohm Unbalanced)
- XLR (mic): 150 ohm
- Full Scale Output: 1/4" (6.35 mm): +15dB differentially
- (+9 dBV single)
- XLR (LINE setting): +15 dBV
- XLR (MIC setting): –15 dBV
- Mic/Line Switch: 30dB pad
- Phantom Power Protection: 1/4" (6.35 mm): Yes, XLR: Yes
- Networking
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328")
- Polar Pattern: Omnidirectional
- Frequency Response: 20Hz to 20kHz
- Sensitivity: –42.5dBV (7.5 mVRMS ) @ 1kHz, 31dB SPL-A
- Self-Noise: A-weighted, Equivalent Acoustical
- Signal-to-Noise Ratio: 63dB
- Maximum SPL: 132dB SPL kHz @ 1% THD, typical, 101dB
- Dynamic Range: Typical
- Draw: 220 µA, maximum
- Bias Voltage : Recommended
- Operating Voltage: 5 VDC
- Housing: Molded ABS
- Polarity: MTQG; Positive Pressure on diaphragm produces positive voltage on Pin 3 with respect to Pin 1
- Cable Diameter: 1.6 mm
- Cable Length: 66" (1.67 m)
- Weight: 15 g (0.53 oz.)
- Capsule Dimensions (LxD): 14.5 mm x 5.2 mm
Features
Shure SLXD1 Digital Wireless Bodypack Transmitter
- Transparent 24-bit digital audio
- Extended 20Hz to 20kHz frequency range (microphone dependent)
- 120dB dynamic range
- Digital predictive switching diversity
- 44mHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6mHz TV band; 12 systems per 8mHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- TQG connectivity offers a variety of microphone options
- Ergonomic, durable plastic construction
- Transparent 24-bit digital audio
- Extended 20Hz to 20kHz frequency range (microphone dependent)
- 120dB dynamic range
- Digital predictive switching diversity
- 44mHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6mHz TV band; 12 systems per 8mHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Rugged metal construction
- 5 mm omnidirectional subminiature design for discrete placement and improved gain-before-feedback
- IP57 dust-resistant, waterproof rated
- Neutral, full sound quality for film, broadcast, speech, theater and performance applications
- Advanced 1.6 mm Shure Plex cable
- Dual redundant ground in cable serves as secondary shield for unprecedented longevity
- Immune to memory effect and kinks
- Fully paintable with typical theater paints, pens, and polishes
- Presence Cap included for tailored frequency response provides additional vocal clarity and presence (3-4dB boost near 10kHz)
- Available in four colors: Black
- Available in two connector types: TA4F (mTQG) and LEMO
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.