10 inputs, SPX FX processor with 24 programs and 2 channels of 1-knob compression—all in a rugged chassis.
Housed in a rugged steel chassis, the MG10X CV can accommodate up to 10 inputs and offers a balanced stereo output. Featuring D-Pre discrete Class-A microphone preamplifiers for pristine sound, it includes an AUX bus for the built-in SPX effect with 24 presets and two channels of single-knob compression.
The MG10X can accept XLR, 1/4" phone and RCA-type pin jack inputs, and offers XLR and phone outputs. The MG10X offers rotary controls instead of faders, reducing the footprint for discrete placement onstage or anywhere space is a premium. A footswitch input allows hands-free effect muting.
The MG10X can accept XLR, 1/4" phone and RCA-type pin jack inputs, and offers XLR and phone outputs. The MG10X offers rotary controls instead of faders, reducing the footprint for discrete placement onstage or anywhere space is a premium. A footswitch input allows hands-free effect muting.
Specifications
General
- Frequency response input to STEREO OUT: +0.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
- Total Harmonic Distortion (THD+N) input to STEREO OUT: 0.02 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
- Crosstalk (1kHz): -78dB
- Hum and Noise (20Hz to 20kHz)
- Equivalent Input Noise: Crosstalk (1kHz)
- Residual Input Noise: -102dBu (STEREO OUT, STEREO master knob set to min)
- Mono [MIC/LINE]: 4
- Mono/Stereo [MIC/LINE]: 0
- Stereo [LINE]: 3
- STEREO OUT: 2
- MONITOR OUT: 1
- PHONES: 1
- AUX SEND: 1
- GROUP OUT: 0
- STEREO: 1
- GROUP: 0
- AUX SEND: 1 (incl. FX)
- Pad (mono): 26dB
- HPF (mono, mono/stereo): 80Hz, 12dB/oct (mono)
- COMP (Mono)
- 1-knob compressor (mono) (Gain/Threshold/Ratio) threshold: +22dBu to -8dBu
- Ratio: 1:1 to 4:1
- Output level: 0dB to 7dB
- Attack time: Approx. 25 msec
- Release time: Approx. 300 msec
- EQ
- High: Gain: +15dB/-15dB, frequency: 10kHz shelving
- Mid: Gain: +15dB/-15dB, frequency: mono 250Hz–5kHz peaking, stereo 2.5kHz peaking
- Low: Gain: +15dB/-15dB, frequency: 100Hz shelving
- Peak LED (mono)
- LED turns on when post-EQ signal reaches 3dB below clipping
- Phantom power voltage: +48V
- Power requirements: PA-10 power adapter (included)
- Power consumption: 22.9W
- Pre-monitor level meter: 2 x 7 segment LED meter [PEAK, +10, +6, 0, -6, -10, -20dB]
- SPX algorithm: 24 programs
- Dimensions (WxHxD): 9.6" x 2.8" x 11.6"
- Net weight: 4.63 lb.
Features
- Discrete Class-A microphone preamps
- Built-in SPX digital effects with 24 programs
- Switchable +48V phantom power
- Color-coded controls offer easy operation